Yes, it’s finally time to get your hands dirty as we’re going to take out the old faucet. This process should be pretty easy once you have loosened the nuts and pipes present under the sink.
It’s usually easier to find a faucet that works in the space allowed than it would be to rebuild the kitchen to accommodate a faucet. Thread the spray nozzle line through the faucet body, then thread the spray hose fitting onto the faucet supply tube and tighten it. Pull the nozzle out of the faucet to make sure the hose under the sink operates freely, then attach the counterweight following the manufacturer’s instructions.
Kitchen faucet spout types
Read more about kitchen faucet pull out hose here. From there, disconnect the water supply lines with an adjustable wrench, checking it doesn’t drip. Leave them to sit for an hour or so with a paper towel underneath. It’s not uncommon to discover that they have a slow drip you never knew about because they were always connected to the supplies. This is the time to use your towels or bucket that you gathered. Place it directly under the sink to catch any excess water that may spill while you disconnect your sink. Using your adjustable wrench, twist it counterclockwise to loosen and disconnect the water supply lines. If your faucet has a sprayer attached, now would be the time to disconnect that as well.
Step 8: Remove the Sprayer Base Pin
Similarly, mineral buildup is typically caused by hard water in the home. While you can replace the faucet, it won’t solve the actual problem. To prevent mineral buildup on the new faucet, you will need to have a water softener installed before replacing the old faucet. There are two types of faucet installations to choose from, and the main difference is their location. Avoid last-minute shopping trips by having all your materials ready ahead of time for this how to replace a kitchen faucet.
Turn off water supply
You will also find faucets with a combination of two finishes or an enamel/metal combination. Bridge faucets are usually compatible with a more traditional decorating scheme. Check the number of holes required as that can vary with bridge styles. Many sinks come predrilled with holes for the faucet, so if you are simply replacing a faucet or you already have a predrilled sink, you know what you’ve got to work with. After you discover that one of your new supply lines is too short because you didn’t measure (me), go back to the hardware store and purchase longer lines. I upgraded to (2) 30” Stainless Steel faucet supply lines for a little over $8 each.